Oil coolers are designed to reduce excess heat generated in lubricants for vehicles, machinery and machinery. For example, a hot engine transfers heat to the oil, which is then circulated through a heat exchanger (also known as an oil cooler), where it is cooled by air or water. Oil coolers achieve cooling by using a cooling medium (usually air or water) to transfer heat from the oil to the medium.
If we can understand the motorcycle, understand the working principle of motorcycle radiator, then we can fully understand the motorcycle in the process of producing motorcycle radiator, or in the process of using motorcycle, it is a great advantage for us, we can clearly know the performance of motorcycle, reasonable and effective use of motorcycle, This is also a great improvement to the life of the motorcycle, let's understand the working principle of the motorcycle and motorcycle radiator
When looking at aluminum rolls and aluminum sheets, the only difference is thickness. Aluminum sheet is any aluminum sheet metal thicker than aluminum foil but less than 6mm. Aluminum sheet is made of aluminum coil cut flat, can be cut into a variety of sizes.
The intercooler is the intercooler, it and the condenser are a cooler, the function and principle are the same, but the use of the position and purpose are different, so the name is different! The condenser is an indispensable part of the four major components of refrigeration (compressor, condenser, throttling device and evaporator) in order to take away the cold load of the evaporator and the heat generated by the work of the compressor. The intercooler is set up to improve the refrigeration efficiency, and its purpose is to make the cooled refrigerant liquid supercool to achieve the purpose of increasing the cooling capacity!
