When looking at aluminum rolls and aluminum sheets, the only difference is thickness. Aluminum sheet is any aluminum sheet metal thicker than aluminum foil but less than 6mm. Aluminum sheet is made of aluminum coil cut flat, can be cut into a variety of sizes.
The intercooler is the intercooler, it and the condenser are a cooler, the function and principle are the same, but the use of the position and purpose are different, so the name is different! The condenser is an indispensable part of the four major components of refrigeration (compressor, condenser, throttling device and evaporator) in order to take away the cold load of the evaporator and the heat generated by the work of the compressor. The intercooler is set up to improve the refrigeration efficiency, and its purpose is to make the cooled refrigerant liquid supercool to achieve the purpose of increasing the cooling capacity!
summarize Oil cooling is the use of engine oil as a coolant, typically used to remove excess heat from internal combustion engines. A thermal engine transfers heat to oil, which then passes through a heat exchanger, usually a type of radiator called an oil cooler. Water cooling is the use of water as a heat absorbing medium to cool the high temperature parts, and then transfer the heat to the outside air, so as to keep the engine working at a suitable temperature.
Aluminum plate refers to a rectangular plate rolled from aluminum ingots. It is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium-thick aluminum plate and patterned aluminum plate.
Aluminum flux is widely used in automobiles, aerospace, electronics, construction and other fields, and has become an indispensable part of modern industrial production.
