Condensers are extremely important components in automotive air conditioning systems and have many differences in terms of cleaning. Condensers are used to dissipate heat in automotive air cooling systems. Only its good heat dissipation can ensure the excellent cooling effect of the evaporator in the cab. In the front of the car, the condensor is most vulnerable to dust, leaves, and insects adhering to it, which will lead to poor heat loss, elevated pressure in the air conditioning system, and no refrigeration in the air conditioning system. Next, let's take a look at the cleaning of the car condenser with the car editor.
Automobile condenser cleaning and maintenance; Method of cleaning
The way to clean the condenser can be to directly rinse the condenser with a water pipe, because cleaning the surface layer of the automobile condenser is convenient to distribute the heat energy to the outside world. Regular cleaning of the condenser surface can greatly improve the cooling effect of the air conditioning system.
Some people clean the air condenser like this: under normal circumstances, the air inlet of the car has a pollen filter, its role is to prevent the outside dust from entering when the car air regulates the external circulation. When cleaning the air, it is necessary to remove the pollen filter and put the air cleaning agent into the air intake. At the same time, the air outlet needs to be closed to prevent the air cleaning agent from flowing out of the air outlet. After these two steps are completed, start the car, open the air switch, and let the cleaning agent circulate well in the air switch system. This process takes a few minutes to ensure that the liquid circulates to all channels of the empty switch system. About 5 minutes after closing empty, the car will shut down. After a while, dirt will flow out of the piping system of the empty chassis.
If your car/in addition, another method of washing is disassembly washing, quite troublesome. First, you have to remove the instrument panel and take out the evaporator with air conditioning. The evaporator void that has not been cleaned for a long time must be &ldquolong & rdquo; it is covered with dirt and small hairs. You need to brush carefully. This step is done. Reinstall the null key, then clean it again with the first method before you finish. Only in this way can we ensure cleanliness. The cleaning method of air condenser is simple and troublesome. You don't want to do it yourself if you need to. If you are not professional enough, you can drive to a professional car wash shop and ask a professional to help you clean.
Automobile condenser cleaning and maintenance; Process of cleaning
1. Add detergent to the water. The washing product of the condensation network is alkaline and slightly corrosive to the condenser, so it is very important to add water to reduce the concentration. Because the concentration is too high, the pipe can only be cleaned very clean, but the corrosion can not be ignored.
2. Start the car and turn on the air to turn the electronic fan. Rinse with water first, with the help of the fan rotation, so that the water all over the condenser. A thorough rinse is necessary. During this period, the electronic fan may stop rotating due to the low condenser temperature. At this point, it is necessary to stop flushing and increase the temperature of the condenser so that the electronic fan can rotate again.
3. After the whole condenser is basically wet, spray the mixed detergent onto the surface of the condenser with a water spray tool (such as watering flowers, etc.). At this time, the electric fan should also be rotating, with its rotation, it is estimated that basically all the washing supplies have been sprayed. At this point, shut down the empty engine and observe the condenser surface. After a few minutes, you will see the dirt on the surface slowly "float" up with little bubbles, and wait a few minutes (most of us wait ten to fifteen minutes to see the concentration).
4. Then start the air rotating fan. At this point, it is necessary to rinse with plenty of water. The more thoroughly you rinse, the better. Don't be lazy about this step. When rinsed enough, you will find that the surface of the condenser is clean. Most of us can wash a condenser as good as new.
Automobile condenser cleaning and maintenance; & mdash condenser type
The high temperature and high pressure snow seed Lyon of the refrigeration system enters the condenser after coming out of the compressor, releasing a lot of heat to the cooling medium and playing the role of antifreezing. Then, depending on its cooling form, condensers can include three types: water-cooled, air-cooled, evaporated and wet-soaked.
