Industry News

The difference between aluminum water tank and aluminum plastic water tank

2024-09-03

Working principle of all-aluminum water tank


The principle of the all-aluminum water tank is mainly based on the heat exchange process ‌, and its working mechanism is closely related to automotive cooling systems. The all-aluminum water tank is part of a water-cooling system designed to keep the car in a moderate temperature range for all operating conditions. All aluminum water tank through its internal heat pipe and heat sink (most of the aluminum), effective cooling of the circulating water. Aluminum pipes are usually flat, while fins are wavy, designed to maximize heat dissipation efficiency. The installation direction is perpendicular to the air flow direction, which helps reduce wind resistance and improve cooling efficiency. Antifreeze flows inside the core of the all-aluminum tank, while air passes through the core outside. This process makes the hot antifreeze cool by dissipating heat to the air, while the cold air warms by absorbing the heat from the antifreeze, thus realizing the exchange and transfer of heat.


‌ The working principle of the aluminum-plastic water tank is mainly based on its material properties and structural design. ‌


Aluminum-plastic water tanks are usually composed of multiple layers of materials, including inner and outer layers of plastic and an aluminum alloy layer in the middle. This structure makes the aluminum-plastic water tank have excellent physical properties and chemical stability, and can withstand certain pressure and temperature changes. Specifically, the working principle of aluminum-plastic water tank involves the following aspects:


‌ Material selection ‌ : The aluminum plastic water tank uses polyethylene (PE) as the outer and inner layer material, which has good corrosion resistance and sealing. The middle aluminum alloy layer provides good strength and durability, able to resist external pressure and impact.


‌ Structural design ‌ : The design of the aluminum-plastic water tank takes into account the pressure distribution and the principle of thermal expansion and cold contraction to ensure the stability of the structure and the reliability of the function in the long-term use process. Reasonable structural design can prevent deformation or leakage caused by temperature change.


‌ Application area ‌ : Aluminum-plastic water tanks are widely used to store a variety of liquids such as drinking water and chemicals due to their excellent physical and chemical properties. Its tightness and durability ensure the purity of the liquid and the safety of storage.


‌ Precautions for use ‌ : When using an aluminum-plastic water tank, care should be taken to avoid excessive pressure and high temperature to prevent the material from aging or deformation. At the same time, regular inspection of the tightness and structural integrity of the water tank is also a necessary maintenance measure.


The main differences between all-aluminum and aluminum-plastic water tanks are their material, construction, weight, cost, and durability. ‌ ‌


‌ Materials and structure ‌ : All-aluminum water tanks are mainly made of aluminum alloy, while aluminum-plastic water tanks are a combination of aluminum and engineering plastics, usually including aluminum heat sinks and plastic water chambers.


‌ Weight ‌ : Because the density of aluminum is greater than that of engineering plastics, the weight of aluminum water chamber of the same shape and size is about twice that of aluminum water chamber, so the weight of all aluminum water tank is significantly greater than aluminum water tank.


‌ Cost ‌ : For small batch production, the mold investment of all-aluminum water tank is smaller, but the labor cost is higher, and the manufacturing process depends on operator skills, and the quality cost is higher. For mass production, although the mold investment of the all-aluminum water tank is small, its high labor cost and quality cost make the total cost high. In contrast, aluminum-plastic water tanks have higher costs when produced in small batches, but have cost advantages in large batches.


‌ Durability ‌ : The heat sink of the all-aluminum tank is tight and has a good heat dissipation effect, but it is easy to be blocked by catkins and flying insects, and needs regular cleaning and maintenance. The plastic water chamber of the aluminum-plastic water tank cannot be repaired if it is damaged, while the water chamber of the all-aluminum water tank will almost not be broken, and the maintenance is more convenient. In addition, the all-aluminum water tank is easy to lead to the rupture of the heat dissipation pipe when it expands and shrinkates, resulting in water leakage, while the aluminum plastic water tank is not easy to break due to the flexible connection.


To sum up, the choice of all-aluminum or aluminum-plastic water tank depends on the specific application requirements. If lightweight and good heat dissipation is required, aluminum-plastic water tanks may be a better choice. However, if more attention is paid to durability and ease of maintenance, an all-aluminum tank may be more appropriate. In practice, decisions should be made based on the specific needs and budget of the vehicle.

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept