Radiator is a type of heat dissipation equipment, and it is also common in many large-scale activity places. The heat sink is relatively small in size, light in weight, and has a simple and elegant appearance. It can be used in a variety of industries and has a certain decorative effect. So how to maintain it?
1. Always Check the Coolant Radiator Volume
The first thing you need to do in implementing radiator care tips is to always pay attention to the condition of the coolant from the radiator itself. Especially the volume. If the volume of coolant from your radiator starts to decrease, it certainly has the potential to cause the engine to overheat.
2. Clean the Radiator Tank Routinely
Then, the thing that is no less important to do is to always clean the radiator tank regularly. Where, in this case you have to diligently drain the water in the radiator regularly. The goal is none other than that the radiator tank is not easily corroded which is triggered by several metal components.
3. Make sure each radiator component is clean
Then, tips on caring for the next radiator, you have to really make sure if the condition of each radiator component is clean from dirt. Starting from the cover, air grille, oil pump, and also the cooling fan.
4. Do not use mineral water
In addition, avoid using liquids in the form of mineral water for radiators. This is very dangerous and can have a bad effect on your machine. This is because the water is likely to contain iron or chlorine which will greatly affect the emergence of rust or corrosion in the radiator itself.
5. Always Use Coolant as a Radiator Fluid
Meanwhile on the other hand, the use of coolant water as a liquid for the radiator
You are of course one of the highly recommended radiator care tips. This is because liquids like this are specifically designed to keep the temperature on the engine stable. At the same time to remove various impurities and rust-triggering substances that may precipitate in the radiator tank.
6. Spray the Radiator Grille Parts when Washing
Spray the radiator grille with high pressure water so that the radiator grille is clean of dirt. It is also quite effective in preventing rust from forming on the outer surface of your radiator. Because, if there is rust on the outer surface, it is possible that it will make the parts of the frame hollow, triggering liquid leaks.
7. Change Coolant Periodically
Furthermore, tips on caring for the radiator is to replace the radiator fluid regularly. This fluid replacement does not need to wait until the fluid volume runs out but is based on the mileage that has been achieved.
For more radiator information, please pay attention to the official website：www.radiatortube.com
