According to the different alloying elements contained in the aluminum strip, the aluminum strip and the aluminum plate are also divided into 8 series. However, the commonly used series are 1000, 3000, 5000 and 8000 series.
According to the annealing state of the aluminum strip, the aluminum strip can be divided into fully soft (o state) semi-hard (H24) and fully hard (h18). The most commonly used ones should belong to the all-soft series, because the O state is easier to stretch and bend.
There are many uses of aluminum tape, such as: aluminum-plastic composite pipes, cables, optical cables, transformers, heaters, shutters, etc.
1060 requires high corrosion resistance and formability, but does not require high strength, chemical equipment is its typical use
1100 is used for processing parts that require good formability and high corrosion resistance but do not require high strength, such as chemical products, food industry equipment and storage containers, sheet metal processing, deep drawing or spinning concave vessels, Welded parts, heat exchangers, printed boards, nameplates, reflectors
3004 Sheets, Thick Plates, Drawn Tubes. As long as the extruded tube is used for the body of the all-aluminum can, it requires higher parts than the 3003 alloy, chemical production and storage devices, sheet metal processing parts, building baffles, cable pipes, sewers, and various lighting components.
3003 Plate. Strip. foil. Thick plates, stretched tubes. Squeeze the tube. type. Great. wire. Cold-worked bars, cold-worked wires, rivet wires, forgings, foils, and heat sinks are mainly used for machining parts that require good formability, high corrosion resistance, or good weldability, or both. There are workpieces that require higher strength than 1*** series alloys, such as tanks and tanks for transporting liquids, pressure tanks, storage devices, heat exchangers, chemical equipment, aircraft fuel tanks, oil conduits, reflectors, kitchen equipment, washing machine tubs body, rivets, welding wire.
5052 This alloy has good formability, corrosion resistance, candleability, fatigue strength and moderate static strength. It is used in the manufacture of aircraft fuel tanks, fuel pipes, and sheet metal parts for transportation vehicles and ships, instruments, street lamp brackets and rivets , hardware products, etc.
